MPB 10 BL – Portable Compactor – Bin Lift
The MPB 10 BL is our 10m³ chain lift, portable compactor with an integrated wheelie bin lifter (BL). The main purpose of a portable compactor is to fully contain all waste whilst reducing the amount of transportation required to dispose of waste. By using the MPB 10 BL, it is ensured that charges are correct for disposal instead of being overcharged for under capacity skips and bins. The powerful 21t compaction force can achieve payloads of up to 4t of general waste but in some instances, up to 7t. As waste is unsightly and most often, smelly, one of the major benefits of a portable compactor is that everything thrown into the machine is compacted into the fully sealed, watertight chamber which means there is no leakage of waste, residuals and smells unlike conventional bins/skips which often leak leading to vermin problems and other negative impacts.
The MPB10 BL has a small 1985x4500mm footprint so it is ideal for tight areas taking up about the space of a car park bay. It also uses a very fast pendulum compaction mechanism which has a self-cleaning scraper blade, these features are great as it can be continually fed with no requirement for cleaning out wet, grotty inspection houses. Boasting a large feed opening of 1400x1000mm, it is ideal for bulky waste and allows various feeding methods such as hand loading, forklifts, tipping skips etc.
The integrated bin lift is great for reducing manual labour and to easily feed the compactor. As standard it is able to lift 1100L wheelie bins via its pintel up to 450kg. The bin lift can be specified with an all-round safety cage.
|Feed Opening Width||1400mm|
|Feed Opening Depth||1000mm|
|Cycle Time||35 Seconds|
|Lifting Method||Chain Lift|
|Electricity Supply||3 Phase, 415V, 32A|
The compactor can be specified with a hand feed door for easy access when you don’t want to use the bin lift. For further customisation, contact us and we will try to meet all requirements.
Typically, the minimum amount of waste per week to gain a cost saving would be either:
- 1100ltr wheelie bins – Ten GW (General waste)
- FEL (Front end loader) skip(s) – Two GW
- REL (Rear end loader) skip(s) – One GW
- Twin cylinders
- ¾ full indicator
- Automatic cycle
- Large feed opening
- Integrated bin lift system
- Self-cleaning scraper blade
- Pendulum compaction method
- Simple, easy to operate controls
- Hydraulic pack separate from waste
- Powerful 21 tonne compaction force
- Top hinged rear door with 100% all round seal
- Rated IP65 so safe to be sited inside or outside
- Lockable front hinged feed door & control panel
- Rollover rear door to achieve maximum tonnages
- Tapered sides to the container for easy emptying
- Helps prevent fly tipping
- Reduces waste disposal costs
- Reduces contractor traffic on site
- More environmentally friendly
- Saves on labour from reduced material handling
- No longer being charged for air voids in skips/bins
- Reduces carbon footprint and complies with ISO 14001
- Reduces the amount of space on site taken up by bins and skips
- Keeps the yard much tidier – contains all waste, liquids and bad smells
The MPB 10 BL is extremely easy to use and requires very little manual work.
Step 1 – Feeding
Wheel the bins full of waste up to the compactor. The operator holds the bin lift and ‘up’ buttons on the control panel and the integrated bin lift will start lifting the bin up via its pintels. The lid will start opening automatically and the waste from the bin will be tipped into the charge box. On the control panel the operator will then hold down the bin lift and down buttons at the same time to return the bin to the floor. Press the green ‘go’ button to start the compaction cycle. The pendulum blade will sweep up all the waste and compact it into the back container. This cycle will run 3 times but can be configured to run more/less or on a timer.
Step 2 – When is the compactor full?
The compactor has an indicator to notify the operator when it is ¾ full. Once this illuminates, the operator can calculate when the compactor will be full and when it needs to be collected by the waste contractor.
Step 3 – Waste removal
The operator will position the bin lift into its up position and lock it into place using the bars provided. The contractor will then arrive on site with a chain lift vehicle and unplug the MPB 10 BL. Four chains are attached to the connection points located on all four corners of the compactor. The vehicle will lift the compactor up and sit it on the vehicle bed. The compactor will be taken away, emptied and returned ready to start using again.
As simple as that! It probably takes longer to read the operation than to implement it. As part of the package, one of our trusty engineers will come to site and show the team how to operate it in person. Training certification can be supplied if required.
*Note – Refurbished models may vary in operation slightly, but the principle will remain very similar.
MPB 10 BL – Portable Compactor – Bin Lift Brochure
Interested in learning more about the MPB 10 BL – Portable Compactor – Bin Lift? Leave your details below to get an instant free copy of our brochure.
Benefits of Compacting
To reduce waste disposal costs
To keep the yard much tidier – no mess or leakage
To gain a rebate of recyclable material
To prevent fly tipping
To have less contractor traffic on site
To be more environmentally friendly
More Questions Than Answers?
We appreciate that our comprehensive range of machinery can sometimes make it difficult to find the right machine to suit your requirements.Show Me