LFA SC 4 BL – Large Static Compactor – Bin Lift

Get a Quote

The LFA SC 4 BL is our largest static compactor with a massive 1500x2000mm feeding opening and 2.82m³ charge box with an integrated bin lift. By using the LFA SC 4 BL, it ensures that charges are correct for disposal instead of being overcharged for under capacity skips and bins. Boasting a high 38t compaction force the LFA SC 4 BL is capable of achieving payloads of up to 12t into a 35-yard RoRo skip. The straight push ram is a low maintenance system which has a fast cycle time of 69 seconds meaning you are able to compact up to 147m³ of waste per hour. Static compactors are most commonly used for dry general waste, but it can be used on lots of different applications where compaction is required. The integrated bin lift is great for reducing manual labour and to easily feed the compactor. As standard it is able to lift 1100L wheelie bins via its pintel up to 450kg. The bin lift can be specified with an all-round safety cage. As the charge box is so large, it is especially suited for high volumes of waste, large bulky waste or by using mechanical feeding systems like conveyors, tele-handlers or forklift tipping skips. The hopper can be fabricated to load via these methods whilst still being able to use the bin tipper.

Width

5100mm

Height

1300mm

Depth

2300mm

Load Weight

8000kg (avg.)

Payment Options

Purchase

Lease

Availability

New

Refurbished

Get a Quote Call Now

Product Dimensions
Overall Width	5100mm
Overall Height	1300mm
Overall Depth	2300mm
Overall Weight	4500kg
Feed Opening Width	1500mm
Feed Opening Height	2000mm

Technical Specification
Compaction Force	38T
Motor	11kW
Cycle Time	89 Seconds
Ram Penetration	350mm
Charge Box Depth	940mm
Charge Box Volume	2.82m³
Max Volume Displacement Per Hour	147m³
Electricity Supply	3 Phase, 415V, 32A

Features

E-stops
Skip clamps
¾ full indicator
Automatic cycle
Extra wide feed opening
Integrated bin lift system
Simple, easy to operate controls
Hydraulic pack separate from waste
Powerful 38 tonne compaction force
Rated IP65 so safe to be sited inside or outside
Low maintenance straight ram compaction method

Benefits

Helps prevent fly tipping
Keeps the yard much tidier
Reduces waste disposal costs
Reduces contractor traffic on site
More environmentally friendly
Fast interchange of skips so minimal down time
No longer being charged for air voids in skips/bins
Reduces carbon footprint and complies with ISO 14001

The LFA SC 4 BL is extremely easy to use and requires very little manual work.

Step 1 – Setup

When installing, the LFA SC 4 BL must be bolted to the floor by one of our engineers. Once installed, the contractor will supply and attach an enclosed 35yd RoRo hook lift skip to it via the compactor’s clamps.

Step 2 – Feeding

Wheel the bins full of waste up to the compactor. The operator holds the bin lift and ‘up’ buttons on the control panel and the integrated bin lift will start lifting the bin up via its pintels, the waste from the bin will then be tipped into the charge box. On the control panel the operator will then hold down the bin lift and ‘down’ buttons at the same time to return the bin to the floor. Press the green ‘go’ button to start the compaction cycle. The straight ram will then compact all of the waste from the charge box into the attached skip. In its standard setup this will cycle 3 times, but it can be configured to run more/less or on a timer.

Step 3 – When is the skip full?

The compactor has an indicator to notify the operator when the skip is ¾ full. Once this illuminates, the operator can calculate when it will be full and when the skip needs to be collected by the waste contractor.

Step 4 – Waste removal

The contractor will arrive on site with a hook lift vehicle and an empty skip, they will set down the empty skip to one side and then start inserting pinning bars to stop the compacted waste from ejecting out of the skip. They will loosen the clamps and detach the skip from the compactor, they then pull the skip away slightly and attach a cover over the opening on the skip to ensure no loose debris falls out in transportation. The full skip is then moved out of the way and set down, the empty skip is then picked back up, moved into place and clamped to the SC 4 BL ready for compaction. The contractor then picks up the full skip and takes it away.

As simple as that! It probably takes longer to read the operation than to implement it. As part of the package, one of our trusty engineers will come to site and show the team how to operate it in person. Training certification can be supplied if required.

*Note – Refurbished models may vary in its operation slightly, but the principle will remain very similar.